От имени Чепецкого механического завода в адрес предприятий и организаций стали приходить поддельные документы (срочные уведомления, заявки на аукционы и т.п.).

Неизвестные лица рассылают фиктивные заявки о проведении аукционов (например, на право заключения договора поставки нержавеющего металлопроката для нужд АО ЧМЗ). При этом, мошенники используют подложные бланки, несуществующую печать АО ЧМЗ, ставят поддельные подписи действующих сотрудников коммерческой службы, а также подписываются сотрудниками вымышленных отделов (например, отдел закупок срочных аукционов АО ЧМЗ).

Официально заявляем, что Чепецкий механический завод к такого рода документам не имеет никакого отношения.

Убедительно просим проверять поступающую документацию, якобы направленную от имени АО ЧМЗ. Для проверки информации необходимо связываться с официальными коммерческими службами Чепецкого механического завода по тел. (341-41) 9-64-22.
Пример поддельного документа

Services

CMP, JSC has a number of unique equipment and is able to provide services for rolling and machining the products of stainless steel, zirconium, titanium, and other non-ferrous metals within production cooperation.

Types of work activities

• Manufacture of forgings with round, square, rectangular section up to 10,000 mm in length.
• Manufacture of rolled products with circular section up to 25,000 mm in length.
• Forging of tubes and bars: tube (bar) diameter is O 10 mm minimum; tube wall thickness is 5mm minimum; length is 6000 mm maximum.
• Cold drawing of bars: bar diameter is O 7 - 25 mm; length is up to 7,000 mm.
• Cold drawing of wire: wire diameter is O 0.45 - 7 mm.
• Manufacture of cold-rolled seamless tubes:
  • O 6-16 mm; wall thickness is 0.1-1.6 mm; length is 1,500 – 5,000 mm
  • O 9-18 mm; wall thickness 0.2-2.3 mm; length 1,500 – 5,000 mm
  • O 9-18 mm; wall thickness 0.2-2.3 mm; length 1,500 – 5,000 mm
  • O 33-17 mm; wall thickness 0.4-2.2 mm; length 1,500 – 4,000 mm.
• Abrasive-belt grinding of the tubes up to 7,500 mm in length.
• Centerless grinding of the tubes up to 9,500 mm in length.
• Honing of the tubes up to 10,000 mm in length.
• Sand blasting of the tubes up to 10,000 mm in length.

Sand blasting of the tubes up to 10,000 mm in length.

Sand blasting of the tubes up to 10,000 mm in length.:

consists of four independent grinding stations, operating both in manual and in automatic mode. The machine is designed for grinding tubes of zirconium and titanium and other non-ferrous materials 80 to 160 mm in diameter and 1.5 to 7.5 m in length. Obtainable roughness is Ra 0.4-0.6

Centerless circular belt grinding machine, RPS 376Т-4 model:

is designed for grinding tubes of zirconium and titanium and other non-ferrous materials 20 to 80 mm in diameter and 1.5 to 9.5 m in length. The machine consists of four independent grinding stations, operating both in manual and in automatic mode. Obtainable roughness is Ra 0.4-0.6

Honing machine, HTC10100W model:

Computer-controlled honing machine HTC-10100W

• Diameter range is 15-150mm 
• Maximum length of working 10,000 mm 
• Travel speed is 1-40m/min. 
• Revolutions of spindle per minute 15 -388 rpm
• Maximum outer diameter of the workpiece on the worktable is 400 mm 
• Obtainable precision of the hole is 6-7 quality class of finish, Ra is 0.3-0.5

Forging plant OFL2-12MN:

is designed for manufacture of forgings with round, square, rectangular section.

• workpiece is Ø 115-450 mm,
• 850-2,500 mm in length
• forging: Ø 115-450 mm;
• 85 mm minimum in thickness;
• up to 10,000 mm in length

Reeling and centering mill:

is designed for manufacture of rolled products with round section from zirconium alloys and titanium.

• workpiece: Ø 100-125 mm;
• 840-1,750 mm in length
• rolled product: Ø 70-110 mm;
• up to 2,500 mm in length

Screw rolling mill СВП-500:

Предназначен для изготовления проката круглого сечения.

• заготовка: Ø 200-450 мм;
• длина 900-2500 мм
• прокат: Ø 115-370 мм;
• длина 2500-25000 мм

Pilger mill ХПТР 15-30:

is designed for manufacture of cold-rolled seamless tubes.

• workpiece: Ø 33-17 mm;
• wall thickness is 0.4-2.2 mm;
• length is 1,500-4,000 mm
• tube: Ø 15-30 mm;
• wall thickness 0.1-2 mm

Pilger mill ХПТР 6-15:

is designed for manufacture of cold-rolled seamless tubes. 

• workpiece: Ø 9-18 mm;
• wall thickness is 0.2-2.3 mm;
• length is 1,500-5,000 mm 
• tube: Ø 6-16 mm;
• wall thickness is 0.1-1.6 mm

Sand-blasting machine А99.032.04.000:

Forging plant SKK-10:

is designed for tubes and bars manufacture.

with pre-heating up to 1,000°С:

• diameter of the workpiece is Ø 50-120 mm;
• length of the workpiece is 500-1,000 mm;
• tube (bar) diameter is Ø 20 mm minimum;
• tube wall thickness is 5 mm minimum;
• length is 6,000 mm maximum;

without pre-heating:

• diameter of the workpiece is Ø 120 mm maximum;
• length of the workpiece is 500-2,500 mm;
• tube (bar) diameter is Ø 10 mm minimum;
• tube wall thickness is 5мм minimum;
• length is 6,000 mm maximum

Forging plant SKK-14:

is designed for tubes and bars manufacture.

with pre-heating up to 1,000°С:

• diameter of the workpiece is Ø 50-120 mm;
• length of the workpiece is 500-1,000 mm;
• tube (bar) diameter is Ø 23 mm minimum;
• tube wall thickness is 5mm minimum;
• length is 6,000 mm maximum;

without pre-heating:

• diameter of the workpiece is Ø 160 mm maximum;
• length of the workpiece is 500-2,500 mm;
• tube (bar) diameter is Ø 14 mm minimum;
• tube wall thickness is 5mm minimum;
• length is 6,000 mm maximum;

Chain bar-drawing machine with drawing force of 10 ton-forces:

Machine is designed for cold drawing of bars.

• diameter of bar is Ø 7-25 mm;
• length is up to 7000 mm.

Drawing machine В-1/350:

Machine is designed for cold drawing of wire.

• diameter of wire is O 0.45-7 mm.